WLED03 WiFi Connected ESP32 PWM Driver for 12V LED Strip

• WLED03 WiFi Connected ESP32 PWM Driver
• Features a Driver for 12 V LED strip lights
• Provides 3 channels driving
• Requires only 30 mA to operate

The WLED03 WiFi Connected ESP32 PWM Driver for 12V LED Strip is a WIFI connected PWM driver for 12v LED strip lights using the popular ESP32. It provides 3 channels driving up to 3 Amps each. The power for the board is 12 V DC.

A 1 A or greater supply should be selected depending on the requirements of your lights. The module itself requires only 30 mA to operate.

The Connections are clearly marked on the PCB. Ground (0 V) is on the left followed by two 12 V terminals, one for the power supply and the other for the LEDs. They are connected together on the PCB. This is followed by the Red (R), Green (G) and Blue (B) terminals which are connected to the LED strip. See the photo and the PCB dimension drawing.

The WLED03 connects via 2.4GHz WiFi to your network. Therefore it must be located in a position where it gets a good WiFi signal. The module should not be enclosed in a metal box/cabinet as this will shield the WiFi signal.

The WLED03 is configured by connecting a USB cable to your PC and running a terminal program.