OVONIC 600mAh 1S LiPo Battery 3.8V 25C (6-Pack) Molex Plug for Syma/UDI FPV Quadcopter

Overview

These OVONIC LiPo batteries are a 6-pack of 1S packs designed for small FPV quadcopters using a Molex main plug, including compatible Syma and UDI 1S models. Each pack is rated at 600mAh capacity with a 25C discharge rate, and uses a 1S1P configuration for compact, everyday flying and quick battery swaps.

Key Features

• 600mAh capacity, 25C discharge: Built for stable power delivery on micro quadcopters.
• Compact size and low weight: Listed at 41.4 x 23.8 x 7.9 mm (1.63 x 0.94 x 0.31 inches) and 14 g (0.03 lb) per battery.
• Molex main connector: Plug-and-play fit for models that use the Molex battery plug.
• 22 AWG lead wire: Stated wire gauge for the battery leads.
• Cell construction note (manufacturer comparison): “Stacking Technology” is presented versus “Winding Technology,” with claimed differences of higher energy density (+6%), longer running time (+12%), lower battery swelling (-8%), and lower internal resistance (-4%).

Specifications

Brand	OVONIC
Battery type	LiPo
Capacity	600mAh
Voltage	3.8V (1S) (product listing); 3.7V (label/graphic)
Discharge rate	25C
Configuration	1S1P
Dimensions	41.4 x 23.8 x 7.9 mm (1.63 x 0.94 x 0.31 inches)
Net weight	14 g (0.03 lb) per battery
Main connector	Molex plug
Balance connector	JST-XHR-2P
Wire gauge	22 AWG

What's Included

• 6 x OVONIC 600mAh 1S 25C LiPo batteries (Molex plug)
• 1 x Packaging box
• 2 x Brand stickers
• 1 x User manual

Applications

• Syma and UDI 1S micro FPV quadcopters that use a Molex battery connector
• Other RC models that match the required battery voltage, dimensions, and plug type

For compatibility questions (connector fit, battery sizing, or choosing the right 1S pack), contact [email protected] or visit https://voltaspir.com/.

Important Charging & Safety Notes

• Compatibility check: Verify your model’s voltage requirement (3.8V/1S) and connector match before connecting.
• Charging safety: Stop charging immediately when the cell voltage reaches 4.2V (standard safe operating range stated as 3.7V–4.2V). Never leave charging batteries unattended.
• Pre-flight inspection: Inspect for swelling, punctures, or damage, and check voltage before flights.
• Battery optimization: If a pack does not hold a full charge or discharges quickly initially, cycle it 2–3 times with a proper balance charger to optimize performance.

Details

Built for 1S micro FPV quads that use a Molex main connector, with a compact 1S1P size for quick swaps.

Confirm voltage, dimensions, and connector fit before use so the pack matches your model’s battery bay and lead type.

Each set includes six 600mAh packs plus the packaging box, brand stickers, and a user manual for basic handling guidance.