OVONIC 2S 7.4V 1800mAh 90C LiPo Battery for RC Cars

OVONIC 2S 7.4V 1800mAh 90C LiPo Battery for RC Cars

Compact high-discharge power for compatible RC cars, crawlers, trucks, buggies, and touring cars. This OVONIC pack combines a 1800mAh capacity with a 2S1P configuration, 7.4V nominal voltage, and 90C discharge rating in a slim 91 × 30.5 × 16 mm format.

Key Features

• RC car series: designed for compatible ground RC vehicles.
• 90C discharge rating: built for responsive power delivery in demanding RC car use.
• Stacked-cell construction: OVONIC presents this construction as supporting higher energy density, longer runtime, reduced swelling tendency, and lower internal resistance compared with conventional wound-cell construction. The percentages shown in the comparison image are manufacturer comparison claims and can vary by test conditions and use.
• Compact pack: 91 × 30.5 × 16 mm dimensions and 89g listed net weight.
• Complete wiring details: equipped with 12 AWG main power wire and a JST-XHR-3P balance connector for 2S balance charging.
• Two main connector choices: select XT60 or Deans/T to match your vehicle. The product image shows the XT60 version; the selected variant determines the supplied main connector.

Specifications

Connector and Charging Lead Details

The separate heavy-gauge red and black 12 AWG leads carry discharge current through the selected XT60 or Deans/T main connector. The smaller JST-XHR-3P plug is the 3-pin balance connector for a 2S pack; connect it to the matching balance port on a compatible LiPo balance charger. Always verify connector polarity before use.

Compatibility

Suitable for RC cars, RC crawlers, RC trucks, RC buggies, and RC touring cars that accept a 2S 7.4V LiPo pack of this size and discharge capability. Confirm the battery compartment dimensions, voltage, polarity, and connector before ordering.

Charging and Safety

• Use a LiPo-compatible balance charger and select the correct 2S charging program.
• Connect the JST-XHR-3P balance plug to the charger's compatible 2S balance port and follow the charger manufacturer's instructions.
• Do not exceed 4.2V per cell or 8.4V for the complete pack.
• A 0.5C to 1C charge rate is recommended unless your charger and battery instructions specify otherwise.
• Allow the battery to cool after use before charging.
• Do not charge unattended. Stop using a pack that is swollen, damaged, overheated, or leaking.
• For storage, keep the pack in a cool, dry, fire-resistant location at approximately 3.8–3.9V per cell.

Package includes: 1 × OVONIC 2S 1800mAh 90C LiPo battery in the selected main-connector version.