OVONIC 22.2V 6S 1300mAh 100C LiPo Battery Pack XT60 for FPV Freestyle Racing RC Drone

Overview

The OVONIC 22.2V 6S 1300mAh LiPo battery pack with XT60 plug is designed for FPV freestyle/racing RC drone quadcopter power systems. It is rated at 100C discharge (200C max burst) to support high-current throttle changes, while the 1300mAh capacity targets a practical balance of weight and flight duration for 6S builds.

Key Features

• High discharge output: 100C discharge rate with 200C max burst discharge rate.
• 6S voltage system: 6S1P configuration, 22.2V nominal.
• XT60 main connector: widely used for reliable high-current connections.
• Manufacturer-stated build highlights: solid copper wire; micro internal resistance < 5 mΩ; high energy density 128 Wh/L.
• Manufacturer-stated cycle life: stacking process extends cycle life to 350+ times.

Specifications

Brand	Ovonic
Chemistry	Li-polymer
Capacity	1300mAh
Voltage	22.2V
Configuration	6S1P
Discharge Rate	100C
Max Burst Discharge Rate	200C
Energy	28.86Wh
Length (dev. 5mm)	74mm (2.89 inches)
Width (dev. 2mm)	44mm (1.72 inches)
Height (dev. 2mm)	34mm (1.33 inches)
Net Weight (dev. 20g)	222g (0.44 lb)
Main Connector	XT60 Plug
Balance Connector	JST-XHR-7P (also listed as JST-XH-7P)

What's Included

• 22.2V 100C 1300mAh LiPo battery x 1
• Packaging box x 1
• Brand stickers x 2
• User manual x 1

Compatibility

• Nemesis 240 Mini, Tweaker 180 Micro Quad, LRC Freestyle V1 (270-296)
• MXP180 FPV Quadcopter, Danaus, Vortex
• FLIP FPV 250S MINI, FLIP FPV 260H MINI
• BumbleBee HD CineWhoop BNF, TAYCAN DUCT 3 INCH CINEWHOOP

Compatibility depends on matching voltage, dimensions, and the XT60 connector.

Charging & Safety Notes

• Select the correct connector type to match the original battery/vehicle setup, and compare dimensions before purchase.
• Stop charging immediately when any cell reaches 4.2V (normal cell voltage range: 3.7V to 4.2V).
• Inspect the battery surface condition and check that the voltage is normal before use.
• If a new battery does not hold a full charge or loses charge quickly, use a balance charger to charge and recycle several times first.

For product selection help or technical questions, contact https://voltaspir.com/ or email [email protected].

Video

Details

Built for 6S FPV freestyle and racing setups, delivering strong punch with a compact 1300mAh pack.

Connector details and fitment at a glance: XT60 main lead plus JST-XHR-7P balance plug, with size and weight listed for planning a 6S build.

A 100C (200C burst) discharge rating helps handle rapid throttle changes common in freestyle and racing.

Each pack arrives with the battery, retail box, two brand stickers, and a user manual.

Manufacturer-stated build highlights include stacked cells for 350+ cycles, high energy density (128 Wh/L), and micro internal resistance under 5 mΩ.