Vendeur: Ovonic
OVONIC 14.8V 5000mAh 4S1P 50C LiPo Battery Pack, XT60 & TRX Plug, JST-XH Balance for RC Car Truck
Détails du produit
Overview
The OVONIC 14.8V 5000mAh 4S1P 50C LiPo battery pack is designed for RC car and RC truck applications where both the voltage and connector type match the vehicle/ESC. It features XT60 and TRX (TRA) discharge plugs plus a JST-XH balance connector for balance charging.
Key Features
- 4S LiPo battery pack: 14.8V nominal
- 5000mAh capacity for RC car/truck runtime needs
- 50C continuous discharge rate
- 100C max burst discharge rate
- Discharge plugs: XT60 & TRX (TRA) plug
- Balancer connector type: JST-XH
Specifications
| Brand | Ovonic |
| Material | Lithium polymer |
| Cell count | 4S |
| Voltage | 14.8V |
| Capacity | 5000mAh |
| Configuration | 4S1P |
| Discharge rate | 50C |
| Max burst discharge rate | 100C |
| Discharge plug | XT60 & TRA Plug |
| Balancer connector | JST-XH |
| Net weight (dev. 20g) | 448g |
| Length (dev. 5mm) | 154mm |
| Width (dev. 2mm) | 42mm |
| Height (dev. 2mm) | 32mm |
What's Included
- 1 x Ovonic 5000mAh 4S1P 50C LiPo Battery Pack
- 1 x User Manual
Usage Notes
- Battery fitment depends on matching both voltage and plug type with the RC car/truck.
- If the plug in the vehicle is a TRA ID connector, the adapter may not fit this LiPo battery.
- Stop charging immediately when any cell reaches 4.2V (normal cell voltage is 3.7V to 4.2V).
- Before use, check the battery surface condition and verify the voltage is normal.
- If a new battery will not hold a full charge or loses charge quickly, use a balance charger and cycle it several times first.
For product selection and connector compatibility questions, contact support at https://voltaspir.com/ or email [email protected].
Details
Built for RC cars and trucks that match a 4S (14.8V) LiPo setup and compatible discharge connector.



