HRB 2PCS 6S 22.2V 6000mAh 100C LiPo Battery XT90 + JST-XH (7-Pin) for RC Helicopter/Plane/Quad

Overview

This 2PCS HRB Li-Polymer (LiPo) battery set is a 6S (6S1P) 22.2V 6000mAh pack with a 100C discharge rating, designed for RC helicopter, airplane, and quadcopter power setups where an XT90 discharge connector is required. It uses a JST-XH balance/charge plug (7-pin balance port) and 10AWG soft, flexible low-resistance silicone wire.

Key Features

• Capacity: 6000mAh; Voltage: 22.2V; Configuration: 6S1P
• Discharge rate: 100C
• Connectors: XT90 discharge plug + JST-XH balance/charge plug (7-pin)
• 10AWG silicone wire (soft, flexible, low resistance)
• Marked energy: 133.2Wh
• Compatibility note: works only when voltage, size, and plug are matched

Specifications

Brand	HRB
Battery type / material	Li-Polymer (LiPo)
Cells / configuration	6S / 6S1P
Voltage	22.2V
Capacity	6000mAh
Discharge rate	100C
Energy (marked)	133.2Wh
Discharge plug	XT90
Charge/balance plug	JST-XH (7-pin balance port)
Suggested charge rate	1C
Wire	10AWG low resistance silicone wire
Dimensions	155 x 48 x 54 mm (0 - 3 mm difference)
Dimensions (inch)	155 mm / 6.10 in; 48 mm / 1.89 in; 54 mm / 2.12 in
Weight	863 g ± 2 g (approx. 30.44 oz / 1.90 lb / 863 g)

What's Included

• 2 x LiPo Battery
• 1 x User manual
• 1 x Carton box

Applications

• RC helicopter, RC airplane, RC quadcopter
• Also commonly used in RC car, truck, and boat setups when size, voltage, and XT90 connector match

For product support and order assistance, contact [email protected] or visit https://voltaspir.com/.

Details

A 6S1P 22.2V 6000mAh pack rated 100C, finished with an XT90 discharge connector and JST‑XH 7‑pin balance plug.

Designed for high-demand RC power setups, with heavy-gauge silicone leads for low resistance and a secure fit in the battery tray.

Performance-focused cell design aims for longer running time, lower resistance, and consistent output across the pack’s capacity.

Works across RC helicopters, airplanes, quadcopters, and many cars or boats when voltage, dimensions, and the XT90 connector match.

Simple connection flow: power off, place and secure the battery, then connect the XT90 lead inside the model.