Aptinex Dagaya 8835DSSR

• Capable of Driving Two DC Motors or One Stepper Motor
• Low-MOSFET ON-Resistance:HS + LS 305 mΩ

The DRV8835 provides an integrated motor driver solution for cameras, consumer products, toys, and other low-voltage or battery-powered motion control applications. The device has two H-bridge drivers,and drives two DC motors or one stepper motor, as well as other devices like solenoids. The output driver block for each consists of N-channel power MOSFETs configured as an H-bridge to drive the motor winding. An internal charge pump generates gate drive voltages. The DRV8835 supplies up to 1.5-A of output current per H-bridge and operates on a motor power supply voltage from 0 V to 11 V, and a device power supply voltage of 2 V to 7 V.

Dual-H-Bridge Motor Driver

Capable of Driving Two DC Motors or One Stepper Motor

Low-MOSFET ON-Resistance:HS + LS 305 mΩ

1.5-A Maximum Drive Current Per H-Bridge

Configure Bridges Parallel for 3-A Drive Current

Separate Motor and Logic-Supply Pins:

0-V to 11-V Motor-Operating Supply-Voltage

2-V to 7-V Logic Supply-Voltage

Separate Logic and Motor Power Supply Pins

Flexible PWM or PHASE/ENABLE Interface

Low-Power Sleep Mode With 95-nA Maximum Supply Current

Tiny 2.00-mm × 3.00-mm WSON Package