2x Ovonic 6S 1300mAh LiPo Battery 22.2V 130C Soft Case XT60 + JST-XHR-7P for FPV Racing

Overview

The Ovonic 6S 1300mAh LiPo battery pack set (2 packs) is designed for high-discharge FPV racing and compact multirotor builds. It uses a 6S1P configuration with an XT60 discharge plug and a JST-XHR-7P balance connector, aiming to deliver strong power under load while staying compact for 3-inch and 4-inch FPV copters.

Key Features

• High-discharge LiPo for FPV: Rated at 130C discharge (with 260C max burst stated), suited for fast throttle response.
• Compact soft-case pack: Soft case construction with compact dimensions for tight builds.
• Connector set for 6S builds: XT60 main lead + JST-XHR-7P balance lead.
• Manufacturer-stated performance points (as shown on product graphics): +12% longer running time, -5% lighter weight, -4% lower resistance, “Safer”, and “ISO International Quality Certification”.
• Manufacturer-listed advantages (as shown on product graphics): long cycle life, faster charging time, higher discharge capacity, higher performance in power, high rate discharge current.

Specifications

Brand	Ovonic
Chemistry	Li-polymer
Configuration	6S1P
Nominal voltage	22.2V
Capacity	1300mAh
Energy (shown on label)	28.86Wh
Discharge rate	130C
Max burst discharge rate (stated)	260C
Discharge plug	XT60
Charge/balance plug	JST-XHR-7P
Dimensions (L x W x H)	75 x 38 x 35mm (2.9 x 1.5 x 1.3in)
Net weight	195g / 0.43lb (per pack)
Pack type (shown)	Soft case

Note on markings: Some product graphics show “120C”, while the battery label shows “130C”.

What's Included

• 2 x Ovonic 6S 1300mAh LiPo battery with XT60 plug
• 1 x User manual

Applications

• FPV racing and freestyle multirotors
• Compatible use cases mentioned: FPV 3-inch and 4-inch copters (voltage and plug must match)

Charging & Safety Notes

• Only use when the voltage and plug match the equipment.
• Stop charging if any cell reaches 4.2V; normal cell voltage range is 3.7V to 4.2V.
• Before first use, check the battery surface condition and verify voltage is normal.
• If a new battery does not hold a full charge or self-discharges quickly, use a balance charger and cycle it several times.

For product support or order assistance, contact [email protected] or visit https://voltaspir.com/.

Video

Details

Built for compact 3–4 inch FPV setups, the pair of 6S 1300mAh packs keeps wiring clean with an XT60 main lead.

A soft-case profile helps the pack sit securely on racing and freestyle frames without adding bulk.

High-voltage 6S power supports punchy throttle response for racing-style flying.

Key build-fit details at a glance: 6S1P 22.2V pack with XT60 discharge plug, JST-XHR-7P balance lead, and compact 75×38×35mm sizing.

Manufacturer-listed performance points focus on runtime, weight savings, and lower resistance under load.

Confirm voltage, connector type, and available space on your frame before choosing a 6S pack.

The set includes two batteries, a user manual, and Ovonic brand stickers.

Ovonic highlights cycle life and discharge capability, along with a discharge-rate curve comparison.

Specs summary for quick matching: soft-case 6S1P pack with XT60 main lead and JST-XHR-7P balance connector.

A close-up view of the soft-case housing and XT60 connector for reliable high-current connections.