2× Ovonic Rebel 2.0 5S 1300mAh 130C LiPo Battery Pack 18.5V XT60 for 5–6 inch FPV Drone

Overview

The Ovonic Rebel 2.0 5S LiPo battery pack is designed for 5 to 6 inch FPV drone builds that use an XT60 power connector. Each pack is rated at 1300mAh capacity with an 18.5V (5S1P) configuration and a 130C discharge rate.

Key Features

• Rated capacity: 1300mAh
• 5S1P configuration, 18.5V nominal
• 130C discharge rate; 260C max burst discharge rate
• XT60 discharge plug and JST-XH balance connector (JST-XHR-6P)
• 12# AWG battery lead (as labeled)

Specifications

Brand	Ovonic
Series	Rebel 2.0
Chemistry	Li-polymer
Configuration	5S1P
Voltage	18.5V
Capacity	1300mAh
Energy	24.05Wh
Discharge Rate	130C
Max Burst Discharge Rate	260C
Discharge Plug	XT60 Plug
Charge / Balance Plug	JST-XH (JST-XHR-6P)
Wire	12# AWG
Net Weight (dev.20g)	190g per pack (0.42 lb)
Size (as labeled)	76 x 37 x 38 mm (2.99 x 1.49 x 1.5 inches)
Length (dev.5mm)	38mm
Width (dev.2mm)	37mm
Height (dev.2mm)	76mm

What's Included

• 18.5V 130C 1300mAh LiPo Battery x2
• Packaging box x1
• Brand stickers x2
• User manual x1

Usage Notes

• For an RC battery, compatibility depends on matching voltage and connector type.
• Stop charging immediately when any cell reaches 4.2V (normal cell voltage range: 3.7V to 4.2V).
• Before use, check the battery surface condition and confirm the voltage is normal.
• If a new battery does not hold a full charge or loses charge quickly, use a balance charger and perform several charge/discharge cycles.

For product questions or order support, contact [email protected] or visit https://voltaspir.com/.

Details

Built for 5–6 inch FPV drones, each 5S 1300mAh pack uses an XT60 lead with JST-XH balance plug, and the graphic lists size and weight for fit checks.

Box contents include two 18.5V 5S 1300mAh packs plus the packaging box, brand stickers, and the user manual.

A compact 5S pack sized for freestyle builds, with the XT60 discharge connector and balance lead ready for common FPV power setups.