2× Ovonic 11.1V 1400mAh 50C 3S1P LiPo Battery XT60 + TRX Adapter for 1/16 Traxxas VXL

Overview

This set includes 2× Ovonic 3S LiPo battery packs designed to deliver 11.1V power with 1400mAh capacity and a 50C discharge rate for RC car/truck use, including 1/16 Traxxas (TRA) VXL models. Each pack uses an XT60 discharge connector and supports a TRX (TRA) connection via an included XT60-to-TRA first-gen connector adapter.

Key Features

• 3S1P 11.1V LiPo: 1400mAh capacity with a 50C discharge rating.
• Max burst rate: up to 100C (as specified).
• Compact size: 86mm × 33mm × 18mm (3.39in × 1.30in × 0.71in) per pack.
• Lightweight: 116g (0.26lb) per pack.
• Connectors: JST-XHR-4P balance/charge plug; XT60 discharge plug; XT60-to-TRA first-gen connector adapter shown.
• Wire: 14 AWG (marked).
• Manufacturer-listed cell construction comparison: “Stacking Technology” claims +6% higher energy density, +12% longer running time, -8% lower battery swelling, and -4% lower internal resistance (vs “Winding Technology”).

Specifications

Brand	Ovonic
Chemistry	Li-polymer (LiPo)
Capacity	1400mAh
Voltage	11.1V
Configuration	3S1P
Discharge Rate	50C
Max Burst Discharge Rate	100C
Energy	15.54Wh (marked)
Balance/Charge Plug	JST-XHR-4P
Discharge Plug	XT60; TRX/TRA supported via XT60-to-TRA first-gen connector adapter (shown)
Wire Gauge	14 AWG (marked)
Dimensions (L×W×H)	86mm × 33mm × 18mm (3.39in × 1.30in × 0.71in); dev.: 5mm (L), 2mm (W), 2mm (H)
Weight	116g (0.26lb) per pack; net weight listed: 232g total (dev. 20g)

Compatibility

• Stated fit: TRA 1/16 VXL models (examples listed: Revo, Fiesta, Boss 302 Mustang) and some RC crawlers.
• Also usable for RC airplanes, helicopters, and boats only when voltage, weight, dimensions, and plug/adapter match the model’s requirements.
• Note: if the vehicle uses a TRA iD connector, the adapter may not fit.

What's Included

• 2 × Ovonic 3S LiPo Battery (11.1V 1400mAh 50C) with XT60
• XT60 to TRA (TRX) first-gen connector adapter (shown; quantity not specified)
• 2 × Brand stickers
• 1 × User manual
• Packaging box (shown)

Charging & Safety Notes

1. Use a compatible RC LiPo balance charger (JST-XHR-4P balance lead).
2. Stop charging at 4.2V per cell (normal range: 3.7V to 4.2V per cell as stated).
3. Always confirm voltage, dimensions, and connector type before use.
4. Inspect the battery condition before each use. If a new pack does not hold a full charge or loses charge quickly, use a balance charger and cycle it several times.

For compatibility questions (connectors, fitment, or charger selection), contact https://voltaspir.com/ or email [email protected].

Details

Ovonic lists a stacking cell design and compares it with winding construction for efficiency and reduced swelling.

Match voltage, dimensions, and connector type to your specific RC model before use, whether it’s for ground or air setups.

The set includes two 3S packs plus the retail box, user manual, brand stickers, and an XT60-to-TRA first-gen connector adapter.